Introduction

It's common to use the soft-delete pattern which is used to not delete an entity from database but only mark it as 'deleted'. So, if an entity is soft-deleted, it should not be accidently retrieved into the application. To provide that, we would add a SQL where condition like 'IsDeleted = false' in every query we select entities. This is a tedious but more importantly a forgettable task. So, there should be an automatic way of it.

ASP.NET Boilerplate provides data filters those can be used to automatically filter queries based on some rules. There are some pre-defined filters, but also you can create your own filters.

Pre-Defined Filters

ISoftDelete

Soft-delete filter is used to automatically filter (extract from results) deleted entities while querying database. If an entity should be soft-deleted, it must implement ISoftDelete interface which defines only IsDeleted property. Example:

public class Person : Entity, ISoftDelete
{
    public virtual string Name { get; set; }

    public virtual bool IsDeleted { get; set; }
}

A Person entity is not actually deleted from database, instead IsDeleted property is set to true when need to delete it. This is done automatically by ASP.NET Boilerplate when you use IRepository.Delete method (you can manually set IsDeleted to true, but Delete method is more natural and preffered way).

After implementing ISoftDelete, when you get list of People from database, deleted people are not retrieved. Here, an example class that uses a person repository to get all people:

public class MyService
{
    private readonly IRepository<Person> _personRepository;

    public MyService(IRepository<Person> personRepository)
    {
        _personRepository = personRepository;
    }

    public List<Person> GetPeople()
    {
        return _personRepository.GetAllList();
    }
}

GetPeople method only gets Person entities which has IsDeleted = false (not deleted). All repository methods and also navigation properties properly works. We could add some other Where conditions, joins.. etc. It will automatically add IsDeleted = false condition properly to the generated SQL query.

A side note: If you implement IDeletionAudited (which extends ISoftDelete) then deletion time and deleter user id are also automatically set by ASP.NET Boilerplate.

IMustHaveTenant

If you are building multi-tenant applications and store all tenant data in single database, you definitely do not want a tenant accidently see other's data. You can implement IMustHaveTenant in that case. Example:

public class Product : Entity, IMustHaveTenant
{
    public int TenantId { get; set; }

    public string Name { get; set; }
}

IMustHaveTenant defines TenantId to distinguish different tenant entities. ASP.NET Boilerplate uses IAbpSession to get current TenantId by default and automatically filter query for the current tenant.

IMayHaveTenant

If an entity class shared by tenants and the host (that means an entity object may be owned by a tenant or the host), you can use IMayHaveTenant filter. IMayHaveTenant interface defines TenantId but it's nullable.

public class Role : Entity, IMayHaveTenant
{
    public int? TenantId { get; set; }

    public string RoleName { get; set; }
}

A null value means this is a host entity, a non-null value means this entity owned by a tenant which's Id is the TenantId. ASP.NET Boilerplate uses IAbpSession to get current TenantId by default. IMayHaveTenant filter is not common as much as IMustHaveTenant. But you may need it for common entitiy types used by host and tenants.

Disable Filters

You can disable a filter per unit of work by calling DisableFilter method as shown below:

var people1 = _personRepository.GetAllList();

using (_unitOfWorkManager.Current.DisableFilter(AbpDataFilters.SoftDelete))
{
    var people2 = _personRepository.GetAllList();                
}

var people3 = _personRepository.GetAllList();

DisableFilter method gets one or more filter names as strings. AbpDataFilters.SoftDelete is a constant string that contains name of the standard soft delete filter of ASP.NET Boilerplate.

people2 will also include deleted people while people1 and people3 will be only non-deleted people. With using statement, you can disable a filter in a scope. If you don't use using stamement, filter will be disabled until end of the current unit of work or you enable it again explicitly.

You can inject IUnitOfWorkManager and use as in the example. Also, you can use CurrentUnitOfWork property as a shortcut if you class inherits some special base classes (like ApplicationService, AbpController, AbpApiController...).

Disable Filters Globally

If you need, you can disable pre-defined filters globally. For example, to disable soft delete filter globally, add this code to PreInitialize method of your module:

Configuration.UnitOfWork.OverrideFilter(AbpDataFilters.SoftDelete, false);

Enable Filters

You can enable a filter in a unit of work using EnableFilter method, as similar to (and opposite of) DisableFilter. EnableFilter also returns disposable to be used in a using statement to automatically re-disable the filter if needed.

Setting Filter Parameters

A filter can be parametric. IMustHaveTenant filter is an example of these types of filters since current tenant's Id is determined on runtime. For such filters, we can change filter value if needed. Example:

CurrentUnitOfWork.SetFilterParameter("PersonFilter", "personId", 42);

Another example: To set the tenantId value for the IMayHaveTenant filter:

CurrentUnitOfWork.SetFilterParameter(AbpDataFilters.MayHaveTenant, AbpDataFilters.Parameters.TenantId, 42);

SetFilterParameter method also returns an IDisposable. So, we can use it in a using statement to automatically restore the old value after using statement.

SetTenantId Method

While you can use SetFilterParameter method to change filter value for MayHaveTenant and MustHaveTenant filters, there is a better way to change tenant filter: SetTenantId(). SetTenantId changes parameter value for both filters, and also works for single database and database per tenant approaches. So, it's always suggested to use SetTenantId to change tenancy filter parameter values. See multi tenancy document for more information.

Defining Custom Filters

To create a custom filter and integrate to ASP.NET Boilerplate, first we should define an interface that will be implemented by entities which use this filter. Assume that we want to automatically filter entities by PersonId. Example interface:

public interface IHasPerson
{
    int PersonId { get; set; }
}

Then we can implement this interface for needed entities. Example entity:

public class Phone : Entity, IHasPerson
{
    [ForeignKey("PersonId")]
    public virtual Person Person { get; set; }
    public virtual int PersonId { get; set; }

    public virtual string Number { get; set; }
}

Since ASP.NET Boilerplate uses EntityFramework.DynamicFilters, we use it's rules to define the filter. In our DbContext class, we override OnModelCreating and define filter as shown below:

protected override void OnModelCreating(DbModelBuilder modelBuilder)
{
    base.OnModelCreating(modelBuilder);

    modelBuilder.Filter("PersonFilter", (IHasPerson entity, int personId) => entity.PersonId == personId, 0);
}

"PersonFilter" is the unique name of the filter here. Second parameter defines filter interface and personId filter parameter (not needed if filter is not parametric), last parameter is the default value of the personId.

As the last thing, we must register this filter to ASP.NET Boilerplate's unit of work system in PreInitialize method of our module:

Configuration.UnitOfWork.RegisterFilter("PersonFilter", false);

First parameter is same unique name we defined before. Second parameter indicates whether this filter is enabled or disabled by default. After declaring such a parametric filter, we can use it by supplying it's value on runtime.

using (CurrentUnitOfWork.EnableFilter("PersonFilter"))
{
    using(CurrentUnitOfWork.SetFilterParameter("PersonFilter", "personId", 42))
    {
        var phones = _phoneRepository.GetAllList();
        //...
    }
}

We could get the personId from some source instead of statically coded. The example above was for parametric filters. A filter can have zero or more parameters. If it has no parameter, it's not needed to set the filter parameter value. Also, if it's enabled by default, no need to enable it manually (surely, we can disable it).

We can create custom filters for security, active/passive entities and so on.

Other ORMs

ASP.NET Boilerplate data filtering is implemented for EntityFramework and NHibernate. Not available for other ORMs yet (including EntityFramework Core). But, actually, you can mimic it for most cases as long as you're using repositories to get data. In this case, you can create a custom repository and override GetAll and other data retrieve methods if needed.